生产线解说词英文配音

Before starting, check whether gear oil in gear box is sufficient through sightglass. If it is lower than the red line, add gear oil (LCKC 220) until the oil level reaches above the red line.

Set the temperature of the oil temperature machine and start its heating, and start the oil pump; (replacement figure 1)

Set the barrel temperature and mold temperature according to the production process and turn on the heating button;

After barrel temperature, mold temperature and oil temperature machine temperature reach the set values, start the main motor and material feed motor, and  increase the rotation speed gradually;

Observe the plasticizing effect of the raw material through the vacuum eye hole, adjust the feeding speed until the material changes from powdery status to slightly agglomerated status, and fi